Kyocera Mita FS-1800/N User Manual page 104

Using the Operator Panel
>MP Tray Size
A4
MENU
?
ENTER
Setting the MP Tray Size
When using the MP tray in the cassette mode, you should set the MP tray
size to the paper size that is used to format the job to print. If they do not
match, printing will not be made on the correct size paper when automatic
paper size selection is made by the application (printer driver). The factory
default setting is A4 or Letter.
For more details about the paper sizes that can be fed from the MP tray, see
Chapter 4.
1
Press the MENU key.
2
Press the or
appears.
Paper Handling >
3
Press the > key.
4
Press the or
>MP Tray Size
A4
5
Press the ENTER key. A blinking question mark (?) appears.
>MP Tray Size
? A4
key repeatedly until Paper Handling >
key repeatedly until >MP Tray Size appears.
1-90