Kyocera Mita FS-1800/N User Manual page 155

Waste Toner Bottle Replacement
6
Insert the new waste toner bottle as shown in the figure below. The
bottle will be locked when it fits into place.
7
Ensure that it is correctly inserted and close the side cover.
The printer parts must be cleaned when replacing the toner
container. See section
8
When replacement of the toner container and waste toner bottle is
completed, set the toner ID (see
1-132). If you replaced the toner container when Replace toner
Clean printer was not displayed, reset the remaining toner
counter (see Resetting the Remaining Toner Counter
1-113).
New Waste Toner
Bottle
2.3 Cleaning
Setting the Toner ID
2-8
on page 2-9.
on page
on page