Kyocera Mita FS-1800/N User Manual page 47

7
ENTER
8
9
ENTER
10
MENU
Press the ENTER key. A blinking cursor (
>>Quick Copy
Press the or key to increace or decrease the value of the figure
where the cursor is blinking. It can be set between 0 and 50. You can
use the > and < keys to move the cursor right and left.
If you want to abandon the setting procedure, press the CANCEL
key.
Display the desired maximum number of jobs and press the ENTER
key.
Press the MENU key. The message display returns to Ready.
1-33
32
Using the Operator Panel
) appears.