Kyocera Mita FS-1800/N User Manual page 165

Printed Results
Dirt on the top edge or back of the paper
Characters out of position.
Corrective Action
Check the paper chute and the ramp.
Pull out the paper feed unit and check for toner on the
paper ramp. Clean the paper ramp using a soft, dry, lint-
2.3 Cleaning
free cloth. See
Check the transfer roller.
If the transfer roller is dirty with toner, try printing
several pages.
Check the file or program.
Check whether the problem is being caused by a
PRESCRIBE 2e command error. If the problem occurs
only with a specific file or program, the most likely cause
is an error in a parameter to a command or command
syntax.
3-5
Print Quality Problems
on page 2-9.