Type Adjust - Kyocera Mita FS-1800/N User Manual

>Type Adjust
MENU
?
ENTER
Customizing Paper Type
>
The following describes the procedure used to set a user-defined paper type
for the printer. Eight custom user settings may be registered. After having
been set, any of these may be called up when setting the paper type for a
paper source.
The paper weight and duplex path can be set (see
Weight on page 1-109, and
selecting the paper type to be customized as follows. For how to reset the
customized settings, see
1
Press the MENU key.
2
Press the
appears.
Paper Handling >
3
Press the > key.
4
Press the
>Type Adjust
Custom 1
5
Press the ENTER key. A blinking question mark (?) appears.
>Type Adjust
? Custom 1
Setting the Duplex Path
Resetting the Type Adjust
or key repeatedly until Paper Handling >
or key repeatedly until >Type Adjust > appears.
>
>
1-107
Using the Operator Panel
Setting the Paper
on page 1-110) after
on page 1-111.