Freeze; Standby Timer - Barco iD PRO R600 Owner's Manual

6. Advanced
The image projection can also be interrupted using the PAUSE key on the RCU.
To restart the image : press PAUSE
6.3.2

Freeze

Freezing the image
With the Freeze function, the image can be frozen.
To restart the image, reuse the Freeze function or press the FREEZE button on the remote.
How to freeze the image ?
1. Press MENU to activate the Tool bar
2. Press → to select General
3. Press ↓ to Pull down the General menu
4. Use ↑ or ↓ to select Freeze (image 6-8)
5. Press ENTER to activate the Freeze function
Image 6-8
The image can also be frozen using the FREEZE key on the RCU
6.3.3

Standby Timer

Purpose of the Standby Timer
If there is no signal, and the standby timer is enabled, a dialogbox is displayed and the projector will shut down after a determined
time.
The countdown time can be set in a dialog box in a range from 180 to 3600 seconds (default value = 300). The Timer can also be
disabled.
How to enable the timer ?
1. Press MENU to activate the Tool bar
2. Press → to select General
3. Press ↓ to Pull down the General menu
4. Use ↑ or ↓ to select Standby Timer (image 6-9)
5. Press ENTER to activate the function
On the screen appears a dialogbox (image 6-10)
6. Use ↑ or ↓ to select Enabled, a box surrounds the selected item, press ENTER to activate
7. Use ↑ or ↓ to browse to the input field
8. Use ←or→ , the numeric keys on the remote or the keypad to change the countdown setting
9. Press MENU or BACK to exit or to go back to the previous menu
36 R5976874 ID PRO R600/R600+ 21/09/2006