Installation; Connections; Power Connection; Input Source Connections - Barco iD PRO R600 Owner's Manual

3. INSTALLATION

Overview
•

Connections

•

Input source connections

3.1 Connections
3.1.1

Power connection

AC power (mains) cord connection
Use the supplied power cord to connect your projector to the wall outlet.
Plug the female power connector into the male connector at the front of the projector.
The power input is auto-ranging from 90 to 240 VAC.
Fuses
For continued protection against fire hazard :
• refer replacement to qualified service personnel
• ask to replace with the same type of fuse.
3.2 Input source connections
3.2.1

Input section

Input Layers
The input section is divided in layers, each of them regrouping several inputs, this architecture allows the input section to be upgraded
at any time with an optional analog or digital layer.
1. Layer 1: analog layer containing analog data and video inputs
2. Layer 2: a hybrid layer containing 2 digital and 1 analog input
3. Layer 3 : is an optional layer, it may be an Audio & Video analog layer or a SDI digital layer.
The optional layer is not available for the Pro version
3.2.2

Input facilities

overview
• 5–cable input
• composite video
• component video (PR/Y/PB)
• S-Video
• Digital Visual Input (DVI)
• Computer input
R5976874 ID PRO R600/R600+ 21/09/2006
3. Installation
9