Table of Contents
Advertisement
Image 6-85
6.7.4
Reset runtime
When to reset the lamp runtime ?
The lamp runtime should only be reset when placing a new lamp.
W
ARNING
technician.
How to reset the lamp runtime in the iQ/iD ?
1. Press MENU to activate the Tool bar
2. Press → to select the Lamp item
3. Press ↓ to Pull down the Lamp menu
4. Use ↑ or ↓ to select Reset runtime
5. Press → to pull down the menu
6. Use ↑ or ↓ to select the lamp to be reset (image 6-86)
7. Press ENTER
A dialog box is displayed (image 6-87)
8. Use ←or →, the numeric keys on the remote, or the keypad to change the serial number of the lamp (serial number 0000000 will
not be accepted).
Image 6-86
R5976874 ID PRO R600/R600+ 21/09/2006
:
Lamp runtime reset as well as the lamp replacement can only be done by a Barco authorized
6. Advanced
79
Advertisement
Table of Contents
