Table of Contents
Advertisement
3.2.6
Digital Visual Interface (DVI) input
DVI
Digital Visual Interface is a display interface developed in response to the proliferation of digital flat panel displays.
The digital video connectivity standard that was developed by DDWG (Digital Display Work Group). This connection
standard offers two different connectors: one with 24 pins that handles digital video signals only, and one with 29 pins
that handles both digital and analog video. This standard uses TMDS (Transition Minimized Differential Signal) from
Silicon Image and DDC (Display Data Channel) from VESA (Video Electronics Standards Association).
DVI can be single or dual link.
Input specifications
Single link DVI
Differential input voltage: 200 mV - 800mV
Image 3-6
a
DVI-I type connector, analog link (4 pins at the right side of the connector) not supported
How to select the DVI Input ?
1. Press 5 on the RCU
Note: Another way for selecting this input is via the Menu.
3.2.7
Computer input
Input specification
TTL sync input : U
min
RGB input = 0.7 V
pp
Image 3-7
What can be connected ?
•
RGBHV
•
RG
B
S
R5976874 ID PRO R600/R600+ 21/09/2006
= 2.0 V
± 3dB
3. Installation
13
Advertisement
Table of Contents
