Barco iD PRO R600 Owner's Manual page 156

9. Exchange
Overview of the commands
• ON
• STANDBY
• PAUSE
• PAUSE ON
• PAUSE OFF
• LOGO
• LOGO ON
• LOGO OFF
• SWITCH SOURCE
• SWITCH LAYOUT
• LAUNCH ATTACHMENT
• STORE ATTACHMENT
• STORE filename
• STORE FILE filepath
• LAUNCH filename
• LAUNCH FILE filepath
• DELETE filename
• DELETE FILE filepath
ON, STANDBY
The projector is put in the specified state at the beginning of this event. Beware that if the SBC (Single Board Computer) is to be
powered-down during STANDBY, that further events will not be processed, since the integration runs on that SBC.
PAUSE, LOGO
The projector is put in the specified state at the beginning of this event, and the state is undone at the end of this event. o A parameter
ON or OFF can be specified to choose between the actions. This action will then be executed at the beginning. So "PAUSE from
12:00 to 13:00" is equivalent to "PAUSE ON at 12:00" + "PAUSE OFF at 13:00"
SWITCH SOURCE, SWITCH LAYOUT
The projector switches source or layout at the beginning of this event.
LAUNCH ATTACHMENT
The attachment is saved at the beginning of this event. Then the associated application is started. o At the end of the event, the
application is killed. This can not be guaranteed if the application was already running on the projector. For example, if a web page
is being displayed, and a second one is launched, the application is not started, but the original browser displays the page. In this
case the second event can not control the browser. This is a limitation of the Windows platform.
STORE ATTACHMENT
The attachment is saved at the beginning of this event. The name of the attachment is used and the file is placed in the Receive
folder.
STORE filename
The attachment is saved at the beginning of this event. The name filename is used and the file is placed in the Receive folder. For
example "STORE MYFILE.PPS" will save the attached file to "C:\Documents and Settings\All Users\Received\MYFILE.PPS"
STORE FILE filepath
The attachment is saved at the beginning of this event. The path filepath is used as absolute filename. For example, the command
"STORE FILE C:\My Videos\MYFILE.AVI" will store the attachment as C:\My Videos\MYFILE.AVI. This of course if permissions are
correct and the directory C:\My Videos exists
DELETE filename
The file with name filename is deleted from the receive folder. For example "DELETE MYFILE.PPS" will delete "C:\Documents and
Settings\All Users\Received\MYFILE.PPS"
DELETE FILE filepath
The file with absolute name filepath is deleted. For example, the command "DELETE FILE C:\My Videos\MYFILE.AVI" will store the
attachment as C:\My Videos\MYFILE.AVI.
Drop down list
Besides the above commands some predefined commands can be selected from a drop down list in the iQPro tab.
150 R5976874 ID PRO R600/R600+ 21/09/2006