Table of Contents
Advertisement
12. TROUBLESHOOT
12.1 Using the OSD
What can be done ?
The projector bus allows the diagnostic of different hardware components divided in two main groups.
•
I
C diagnostics : a number of internal electronic boards can be diagnosed and a graphical interface shows whether an error is
2
•
Lamps and power supply : lamp temperature and power related failures are logged and can be checked at any time.
How to display the I
1. Press MENU to activate the Tool bar
2. Press → to select the Tools item
3. Press ↓ to Pull down the Tools menu
4. Use ↑ or ↓ to select Diagnostics
5. Press → to pull down the menu
6. Press ENTER to select I
A text box is displayed
Image 12-1
How to display the Lamps and power supply diagnostic menu ?
1. Press MENU to activate the Tool bar
2. Press → to select the Tools item
3. Press ↓ to Pull down the Tools menu
4. Use ↑ or ↓ to select Diagnostics
5. Press → to pull down the menu
6. Press ENTER to select Lamps and power supply (image 12-2)
A text box is displayed (image 12-3)
R5976874 ID PRO R600/R600+ 21/09/2006
C diagnostics menu ?
2
C (image 12-1)
2
12. Troubleshoot
163
Advertisement
Table of Contents
