Table of Contents
Advertisement
7. IQ Network
Image 7-5
When resetting the PC the menuitems in the BarcoReality SIM 5plus Server menu are greyed out during a
short period.
Projector Standby state setting
This setting defines what should happen with the BarcoReality SIM 5plus Server when the projector is switched to standby.
The BarcoReality SIM 5plus Server can stay in the ON state or it can be switched OFF
Projector On state setting
This setting defines what should happen with the BarcoReality SIM 5plus Server when the projector is switched on.
The BarcoReality SIM 5plus Server can stay OFF (switching on can then happen manually in the general menu) or it can be switched
on (at the same time as the projector)
Automatic start up: How to set the automatic startup ?
1. Press MENU to activate the Toolbar
2. Press → to select Installation
3. Press ↓ to Pull down the menu
4. Use ↑ or ↓ to select BarcoReality SIM 5plus Server settings
5. Press ENTER
6. A dialogbox is displayed (image 7-6)
7. Select ON for the "Projector On state" setting
The BarcoReality SIM 5plus Server will now be automatically switched on at the next startup of the projector
Image 7-6
The BarcoReality SIM 5plus Server will be switched on but not necessarily selected by default, go to Source
selection in the menu to select the iQ PC.
112
R5976874 ID PRO R600/R600+ 21/09/2006
Advertisement
Table of Contents
