Edit File - Barco iD PRO R600 Owner's Manual

6. Advanced
6.8.3

Edit file

What can be done with the Edit file menu ?
The Edit file menu makes it possible to change the settings of the file according to the real settings of the connected source. Consult
the source specifications before entering the data.
How to edit a file ?
1. Press MENU to activate the Tool bar
2. Press → to select the Image files item
3. Press ↓ to Pull down the Image files menu
4. Use ↑ or ↓ to select Edit (image 6-95)
5. Press ENTER
A dialog box is displayed
6. Use ↑ or ↓ to select the desired file
Note: If in PiP mode the cursor is placed by default on the active file which has the focus.
7. Press ENTER
A dialog box is displayed (image 6-96)
8. Press ENTER
A dialog box is displayed (image 6-97)
9. Use ←or →, the numeric keys on the remote, or the keypad to edit and change the values, confirm with ENTER
Note: greyed out fields can not be updated (total pixels)
Image 6-95
84 R5976874 ID PRO R600/R600+ 21/09/2006