Table of Contents
Advertisement
7. IQ Network
Image 7-57
installation menu
How to add a projector to the list ?
1. Click on the three suspension points to open the projector selection dialog box. (image 7-58)
2. Click on the Add button.
A dialogbox is displayed. (image 7-59)
3. Enter the projector name or browse the network.
4. Click on OK.
5. Enter the Location (optional).
6. Click on Connect.
Following message is displayed : "Connected to <projectorname>..."
Image 7-58
How to select an existing projector by its name ?
1. Click on the three suspension points to open the projector selection dialog box, image 7-58
2. Open the listbox and select the projector. (image 7-60)
the location will also be filled (if it has been entered previously).
3. Click on Connect.
Following message is displayed : "Connected to <projectorname>..."
Image 7-60
How to select an existing projector by its location ?
Can be useful when the projector name is not known.
1. Click on the three suspension points to open the projector selection dialog box, image 7-58
2. Open the listbox and select the location. (image 7-61)
136
Image 7-59
R5976874 ID PRO R600/R600+ 21/09/2006
Advertisement
Table of Contents
