Table of Contents
Advertisement
12. Troubleshoot
Image 12-2
Image 12-3
For Barco certified service technicians only: For more information on possible hardware failures refer to the
Service Manual.
12.2 FAQ table
What to do when... ?
Symptom
The projector is working
(operational mode) but Server
is not running
The projector is in standby mode
and the Server is not running
No client/server communication
in case of a point to point
communication
No client/server communication
over the LAN
When using the DropZone, the iQ
Pro server does not accept calls
from client(s)
164
Possible cause
•
The Projector ON state
setting ( in the "iQ Pro
Server settings" menu)
•
The Projector Standby
state setting ( in the "iQ Pro
Server settings" menu)
•
IP address is not filled in
correctly
•
Client configuration
•
Netmeeting
settings are
TM
incorrect
Check
•
The setting should be
"ON"
•
The setting should be
"ON"
•
IP address
•
Client configuration:
projector name
•
Netmeeting
settings
TM
R5976874 ID PRO R600/R600+ 21/09/2006
References
IT administrator
IT administrator
Advertisement
Table of Contents
