Blanking; Input Balance - Barco iD PRO R600 Owner's Manual

330
Rc
320
310
Image 6-51
Select a coordinate that is present in the common gamut
Another way to determine the new coordinates is to use the DynacolorTool (software tool running on a laptop
or PC), contact Barco for more information.
6.4.9

Blanking

Blanking in the Image menu
The blanking in general allows to blank unwanted video information (noise in the top or bottom of the image).
The blanking in the image menu is the same as in the Display settings menu except for the fact that here the blanking settings are
stored in the image files. In other words each custom file or source has its own blanking values.
See the blanking procedure in the Display settings menu.
If the selected source is not entirely displayed always check first the blanking settings in the image menu
since the active custom file may contains blanking.

6.4.10 Input balance

Introduction: Unbalanced color signals
When transporting signals, there is always a risk of deterioration of the information contained in the signals.
The alterations of the three color signals will happen independently i.e. the colors will end to be unbalanced,
B
Image 6-52
R5976874 ID PRO R600/R600+ 21/09/2006
640 650
R2
R1
660
6. Advanced
0.7V
Black level
61