Source Selection - Barco iD PRO R600 Owner's Manual

6. Advanced
6.2

Source Selection

Overview
• Source selection
• Composite Video
• S-Video
6.2.1 Source selection
Selecting a source
The Source selection menu allows to select one of the different sources. Another method to select an input source is via the remote
control using the numeric keys or by using the local keypad.
When selecting a source with a different resolution (and/or aspect ratio) than the projector's resolution (and/or
aspect ratio ), the source can be shown in its native resolution or can be re-scaled to the projector's resolution,
the latter case brings of course some loss of quality.
For more info on resolution match see the Show native resolution function in the Image menu.
How to select a source ?
1. Press MENU to activate the Tool bar
2. Press ↓ to Pull down the Source Selection menu (image 6-3, image 6-4)
3. Use ↑ or ↓ to select one of the different sources ( Press → to Pull down if the item has a submenu)
4. Press ENTER to confirm your choice
On the screen appears now the selected source.
Image 6-3
32 R5976874 ID PRO R600/R600+ 21/09/2006