Table of Contents
Advertisement
The Dynacolor™ Interface
Following parameters are available in the Dyancolor™ Interface:
Measured Values
Red x, y
Green x, y
Blue x, y
White x, y
Red L
Green L
Blue L
White L
Desired Values
Red x, y
Green x, y
Blue x, y
Cyan x, y
Yellow x, y
Magenta x, y
White x, y
Red g
Green g
Blue g
Cyan g
Yellow g
Magenta g
White g
Status
Factory Preset
Basic Dynacolor™ Adjustment
We assume we have a basic setup with 2 projectors, the Dynacolor™ adjustment is done by using only the Dynacolor™ menu:
1. Enable Dynacolor™ on both projectors.
2. Assume the first projector has the following measured values. (image 6-47)
3. Assume the second projector has the following measured values. (image 6-48)
4. We start by setting both projectors to the common red coordinate.
Tip:
Draw a quick sketch of both gamuts as a graphical help. (image 6-49)
5. Display the internal color bar pattern on both projectors.
6. In the desired values, adjust the red coordinate to a common value for both projectors.
Tip:
The color bar of the adjusted coordinate will no longer be displayed in case the coordinate is not present within the gamut
of the adjusted projector e.g. with the desired values for red set to x=660 and y= 318. (image 6-50)
R5976874 ID PRO R600/R600+ 21/09/2006
These are the colors the projector displays when no color changes are made
Coördinates for the Red point
Coördinates for the Green point
Coördinates for the Blue point
Coördinates for the White point
Red Light output
Green Light output
Blue Light output
White Light Output
These are the colors you want the projector to display when the status is enabled
Coördinates for the Red point
Coördinates for the Green point
Coördinates for the Blue point
Coördinates for the Cyan point
Coördinates for the Yellow point
Coördinates for the Magenta point
Coördinates for the White point
Red Light Gain
Green Light Gain
Blue Light Gain
Cyan Light Gain
Yellow Light Gain
Magenta Light Gain
White Light Gain
Enables or disables Dynacolor™
Sets the measured parameters back to the factory preset for the current set
6. Advanced
57
Advertisement
Table of Contents
