6. Advanced
The logo display is only possible in the full screen mode, a logo can thus not be displayed (rescaled) in a
window in the PiP mode.
When there is no signal connected, the projector will also start its standby timer countdown (if enabled) and
shuts down after the predetermined time.
6.7
Lamp management
6.7.1
Runtimes
How to display the lamp runtimes ?
1. Press MENU to activate the Toolbar
2. Press → to select the Lamp item
3. Press ↓ to Pull down the Lamp menu
4. Use ↑ or ↓ to select Runtimes (image 6-80)
5. Press ENTER
A textbox is displayed (image 6-81)
Image 6-80
Image 6-81
6.7.2
Mode
What are the different lamp modes ?
Single mode
76
R5976874 ID PRO R600/R600+ 21/09/2006