Table of Contents
Advertisement
7. IQ Network
Image 7-49
advanced diagnostics screen: green = OK ; red = error
7.7
Configuration
7.7.1
E-mail messaging
What can be done ?
E-mail messaging allows the projector to generate automatically E-mail and send them to three configurable recipients.
The mail can be sent on a regular basis i.e. daily, weekly or monthly or can be triggered by warnings.
Basically two different configurations must be done:
•
content
•
timing
Content configuration
The content configuration allows to define the content of the E-mail
•
general content
•
advanced content
Timing configuration
E-mail sending can be set to be time dependent or status dependent
•
daily : E-mail is sent every day, the time can be set
•
weekly: the day can be set with a calendar
•
on warning : a E-mail is sent whenever a warning is generated by the projector
7.7.2
E-mail configuration
How to configure the E-mail ?
1. Click on Configuration in the toolbar
2. Click on Mail Config to open the mail configuration screen
See image 7-50.
3. set the content by clicking the desired content (image 7-51)
4. set the timing by clicking the desired time interval
Note: if the timing is chosen to be monthly, a calendar is displayed , click the days on which the E-mail should be sent
132
R5976874 ID PRO R600/R600+ 21/09/2006
Advertisement
Table of Contents
