Rate Limiting Hotspots - Ruckus Wireless ZoneFlex 2925 User Manual

Ruckus Wireless ZoneFlex 2925/2942 User Guide | Managing the Access Point
2
When the Configure::Wireless::Common workspace appears, click a hotspot-specific
tab.
3
When the Configure::Wireless::Wireless [#] workspace appears, click one of two
Broadcast SSID options for this hotspot.
4
Repeat the previous step with the remaining hotspot tabs.
5
Click Update Settings to save and apply the changes.
Changing a Hotspot-specific SSID
This affects how a specific wi-fi hotspot is "identified" in a user's wireless device.
1
Open the Web User interface, and click Wireless under Configuration.
2
When the Configure::Wireless::Common workspace appears, click a hotspot-specific
tab.
3
When the Configure::Wireless::Wireless [#] workspace appears, delete the text in the
SSID field that represents this hotspot.
4
Type a new SSID.
5
Repeat the previous two steps with the remaining hotspot tabs.
6
Click Update Settings to save and apply the changes.

Rate Limiting HotSpots

Rate limiting controls fair access to the network. When enabled, the network traffic
throughput of each network device is limited to the rate specified in the traffic policy, and
that policy can be applied on either the uplink or downlink. Rate limiting is restricted to
Super User access only.
Rate limiting topics covered in this section
• "Enabling rate limiting" on page 43
• "Rate Limiting fields and headings" on page 45
Enabling rate limiting
1
Open the Web User interface, and click Wireless under Configuration.
2
When the Configure::Wireless::Common workspace appears, click a hotspot-specific
tab, such as Wireless 1.
3
When the Configure::Wireless::Wireless [#] workspace appears, click the Edit Set-
tings button next to "Rate Limiting".
43