5. Configure the following settings to customize your 802.1X authentication.
•
RADIUS NAS-ID: Enter the network ID assigned to your RADIUS server.
•
Authentication Server [-Required-]: Enter the information needed to estab-
lish a connection between the AP and the RADIUS server. The default port for
RADIUS authentication is 1812.
•
Accounting Server [-Optional-]: Enter the information needed to establish
this connection. The default port for RADIUS accounting is 1813.
6. Click Update Settings to save and apply the changes. A confirmation message
appears at the top of this page.
7. Click Go back to Wireless Configuration to reopen the previous page.
Figure 37.
802.1X settings
Rate Limiting
Rate Limiting allows you to cap the data transfer rates per client for a specific WLAN.
To enable per station rate limits
1. Go to Configuration > Wireless (Configuration > Radio 2.4G or Configuration
Radio 5G on dual band APs).
2. Select the WLAN that you want to configure from the tabs at the top of the page.
3. Click the Edit Settings button next to Rate Limiting.
4. The Rate Limiting page appears.
Configuring the Access Point
Rate Limiting
73