Rate Limiting - Ruckus Wireless ZoneFlex T301s User Manual

4 Review the options listed in
Table 29. Threshold options
Option
Beacon Interval
Data Beacon Rate
(DTIM)
RTS/CTS Threshold (The default value is 65535.) This option determines at what
5 Click Update Settings to save and apply the changes. A confirmation message
appears at the top of the page.
You have completed configuring the threshold options. To reopen the previous page,
click the Go back to Wireless Configuration link.

Rate Limiting

Rate Limiting allows you to cap per-client data transfer rates for a specific WLAN.
1 Go to Configuration > Wireless/Radio 2.4G/Radio 5G.
2 Select the WLAN that you want to configure from the tabs at the top of the page.
3 Click the Edit Settings button next to Rate Limiting. The Rate Limiting page
appears.
4 Set the maximum Downlink and Uplink rate per station.
The table below your selections updates to show the maximum transfer rate per
station for each traffic type.
5 Click Update Settings to save your changes.
You have completed configuring the rate limiting options. To reopen the previous
page, click the Go back to Wireless Configuration link.
Ruckus Wireless Outdoor AP 100.1.0 User Guide, 800-70863-001 Rev A
Table 29, and then make any needed changes.
Description
(The default value is 100.) The value indicates the frequency
interval of the beacon in milliseconds. A beacon is a broadcast
packet sent by the AP to synchronize the wireless network.
(The default value is 1.) The value indicates the interval of the
Delivery Traffic Indication Message (DTIM). This is a countdown
field that the device uses to inform its clients of the next window
for listening to broadcast or multicast messages.
packet length the RTS/CTS function is triggered. A lower
threshold may be necessary in an environment with excessive
signal noise or hidden nodes, but may result in some performance
degradation.
Configuring Wireless Settings
Configuring Wireless # (WLAN Number) Settings
101