Rate Limiting
Rate Limiting allows you to cap per-client data transfer rates for a specific WLAN.
1 Go to Configuration > Wireless/Radio 2.4G/Radio 5G.
2 Select the WLAN that you want to configure from the tabs at the top of the page.
3 Click the Edit Settings button next to Rate Limiting. The Rate Limiting page
appears.
4 Set the maximum Downlink and Uplink rate per station.
The table below your selections updates to show the maximum transfer rate per
station for each traffic type.
5 Click Update Settings to save your changes.
You have completed configuring the rate limiting options. To reopen the previous
page, click the Go back to Wireless Configuration link.
Figure 40. Limit per station traffic rates on a specific WLAN
Controlling Access to the Wireless Network
Access Control enables you to specify the stations are allowed to join (associate
with) your wireless networks. Access controls can be configured for each WLAN
from its respective Wireless # tab.
Access Control List (ACL) Options
This section describes the options that you can use to control access to the wireless
network.
ZoneFlex Outdoor Access Point 9.8.1 User Guide, 800-70598-001 Rev B
Configuring Wireless Settings
Configuring Wireless # Settings
97