Travel System - Britax UNITY Instructions For Installation And Use Manual

TRAVEL SYSTEM

This Infant Carrier is designed to be connected to compatible strollers. The
following pages provide a general instructions about using the Infant Carrier with a
stroller which may differ slightly for some strollers. Preferably use the attachment
instructions provided with your stroller. Use the stroller in accordance with the
instructions supplied with the stroller. This Infant Carrier will not fit all strollers.
There are two systems to connect to the Infant Carrier to the stroller. Check with the
stroller instructions or promotional literature to see which system applies.
• Integral latch which fits to the arm bar or tray, or
• Britax Stroller CLICK & GO™ Adaptor that fits to the receivers on the stroller
side armrests.
DO NOT LEAVE THE CHILD IN THE INFANT CARRIER FOR EXTENDED PERIODS.
THE TRAVEL SYSTEM INFANT CARRIER IS DESIGNED TO PROVIDE MOBILITY
OUTSIDE OF THE CAR BUT IT SHOULD NOT BE USED IN PLACE OF AN
APPROPRIATE COT.
THE INFANT CARRIER MUST ONLY BE USED WITH A SAFE-N-SOUND AND
STEELCRAFT STROLLERS WITH COMPATIBLE ATTACHMENTS. DO NOT USE WITH
ANY OTHER STROLLER.
IF IN DOUBT ABOUT THE METHOD OF INSTALLATION, CONTACT BRITAX
CHILDCARE CUSTOMER SERVICE ON 1300 303 330.
44