Britax UNITY Instructions For Installation And Use Manual page 30

HOW TO USE
PLACING BABY & INFANT CARRIER IN BASE
A. Position the Infant Carrier over the top of the
base. Make sure the Harness Adjustment Strap is
not caught between Infant Carrier and Base then
lower the Infant Carrier into position.
B. Push down on the Infant Carrier until an
audible click is heard. Pull on the Infant Carrier
to ensure it is correctly locked into position.
IMPORTANT:
Lift again to check engagement.
C. The handle may be rotated into other positions if
needed although this may be difficult with the seat
in front.
30
CAUTION:
If fitted with the Britax Stroller
Click & Go™Adaptor, ensure to
operate the handle as per pages 13
and 14 to prevent pinching fingers.
Click