Accessories - Britax UNITY Instructions For Installation And Use Manual

ACCESSORIES

The following instructions apply to accessories that may be supplied with this
restraint at point of purchase. If not, a variety of accessories are available from
various retailers of Safe-n-Sound products.
TO REMOVE PADDED INSERT - Style may vary
The Padded insert is only required for
supporting the smaller baby and must be
removed once baby's shoulders reach the
upper shoulder height marker to allow longer
use of the Carrier.
A. Disengage the harness buckle and feed the
buckle out through buckle slot in the Padded
insert.
B. Remove the insert pad from the shoulder
harness straps. Installation is the reverse of
removal procedure.
C. Discontinue use of the Padded insert if it
causes discomfort or cramps the space
available for baby within the Infant Carrier.
SHOULDER PADS
The shoulder pads may require release by press studs. If fully fitted to the shoulder
strap then you will need to disconnect the shoulder strap as described on page 18.
40
Padded
Insert
Shoulder
Pads