Britax UNITY Instructions For Installation And Use Manual page 51

BRITAX STROLLER CLICK & GO™ADAPTOR
A. To attach the Britax Stroller Click & Go™ Adaptor to the Infant Carrier ensure the
Carrier's Handle is in "Rocking position"
handle boss and pull the trim away from the side of the carrier and trim is placed
aside to align the holes.
B. Align the Adaptor in the recess under the
handle boss, push up and click into place.
C. Insert Locking Pin into hole. Align both top
and bottom holes.
* Refer to page 13 for handle position
TRAVEL SYSTEM -
, disconnect the elastic under the
2
Push in under handle
Push in Locking Pin
2
B
C
51