Britax UNITY Instructions For Installation And Use Manual page 29

C. Ensure slack is removed from the lap straps
by pulling the shoulder harness straps through
the buckle tongues, then pull the Harness
Adjustment Strap to take up the slack in the
harness, adjusting to a firm but
comfortable fit. Make sure that
the baby's arms and legs are
free and the crotch strap is
between the legs. Check that
the slack in straps is minimal.
Do not use the restraint if
straps do not tighten and
contact your local authorised
service agent for repair.
CAUTION: A LOOSE HARNESS IS DANGEROUS
Ensure the end of the harness Adjustment Strap is connected to the cover
to avoid tripping on the end. Ensure the Harness adjustment strap hook is
attached when carrying the carrier (see above).
Pull Harness Straps
through the buckle in
direction of arrows
Hook the Adjuster Strap on to the loop
to prevent tripping over the strap.
HOW TO USE
Pull Harness Adjustment
Strap to remove slack.
29