Britax UNITY Instructions For Installation And Use Manual page 36

CARE & MAINTENANCE
COVER
For baby's comfort and health the Infant Carrier cover is removable for cleaning.
Cleaning instructions are on the care label attached to the liner. Washing the cover
prior to use will remove excess fluff and dye's.
TO REMOVE THE COVER
A. Remove the Canopy and Baby insert pad (if
supplied) as described on page 15. Unclip the
two infant carrier cover straps which are secured
by plastic hooks under the handle attachment
point.
B. Disconnect the shoulder harness straps from the
Metal Strap Connector and feed through shoulder
slots in both infant carrier and cover. Refer to
page 19.
C. Feed the shoulder harness straps and tongues
through lap strap slots in the Cover only. There is
no need to remove the harness straps from the
Infant Carrier.
D. Lift the cover around the rim of the infant carrier
at the harness adjuster end, feed the crotch
buckle through the slot in cover and pull the
harness adjuster strap out of the slots.
E. Remove the cover for cleaning.
36
Unhook clips on either
side of cover under the
handle then remove cover
Pull cover off
from the corners