Warnings - Britax UNITY Instructions For Installation And Use Manual

Britax unity (40/a/2010) infant carrier
Hide thumbs Also See for UNITY:
Table of Contents

Advertisement

Use the restraint exactly as shown in the instructions.
Fit the restraint firmly to the car seat.
Fit the harness firmly to the child.
A loose restraint or harness is dangerous.
DO NOT LEAVE CHILDREN UNATTENDED IN THE CAR.
Supervision of children is needed because they may be able to undo buckles.
DO NOT USE A REAR-FACING CHILD RESTRAINT WHERE AN AIRBAG IS
FITTED IN FRONT OF THE SEATING POSITION. For other airbags, refer to the
car owner's handbook for warnings and instructions.
To ensure baby's back is evenly supported do not put more than one nappy on
the baby and make sure the nappy is not thickly folded at the back.
Do not alter or modify this restraint.
Repairs must only be done by the manufacturer or agent.
Do not allow the restraint to come into contact with polishes, oils, bleach and
other chemicals.
Destroy the restraint if it has been in a severe crash, even if no damage is
visible.
DO NOT USE THIS RESTRAINT WITHOUT THE COVER.
Make sure the handle is latched properly every time you pick up the Infant
Carrier.
THIS RESTRAINT IS NOT SUITABLE FOR USE WHERE THE UPPER
ANCHORAGE STRAP MAY FALL INTO A SPLIT IN THE SEAT BACK. (E.G.
HATCHBACK OR WAGON).
4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents