Britax UNITY Instructions For Installation And Use Manual page 13

ADJUSTMENT OF HANDLE POSITION
The Unity™ Travel System Infant Carrier features a sturdy carry handle which can be
used in conjunction with the curved base to convert it to a rocker. At the base of the
handle there are two large buttons which control the three positions of the handle.
These positions are the "carry (or travel) position"
and the "non-rocking position"
A. To convert from carry to "rocking position"
depress the large buttons on each side and rotate
the handle towards the front of the Infant Carrier.
When you have started rotating the handle release
the buttons and continue rotating the handle round
until it locks into position.
B. Ensure the handle is locked in position securely.
The "rocking position"
to rock without the possibility of the Infant Carrier
tipping over.
C. To convert to a "non-rocking"
depress both buttons and rotate the handle to
the fixed position. Ensure the handle is locked in
position securely.
IMPORTANT :
Do not place the Infant Carrier on a table or
a work-top where it could fall off.
.
3
enables the Infant Carrier
2
3 position
HOW TO SET-UP
, the "rocking position"
1
Carry Position
1
,
2
Rocking Position
2
Non-rocking
3
Position
,
2
13