Travel System - Britax Safe'n'Sound Instructions For Installation & Use

TRAVEL SYSTEM

This Baby Capsule is designed to be connected to compatible strollers. The following
pages provide general instructions about using the Baby Capsule with a stroller which
may differ slightly for some strollers. Refer to the attachment instructions provided
with your stroller. Use the stroller in accordance with the instructions supplied with the
stroller. This Baby Capsule will not fit all strollers.
There are two methods of connecting the Baby Capsule to the stroller. Check with the
stroller instructions or promotional literature to see which system applies.
• Integral latch which fits to the arm bar or tray, or
• Britax CLICK & GO™ Adaptor that fits to the receivers on the stroller side
armrests.
The stroller instruction manual will provide full instructions on use of the stroller.
DO NOT LEAVE THE CHILD IN THE BABY CAPSULE FOR EXTENDED PERIODS.
THE TRAVEL SYSTEM BABY CAPSULE IS DESIGNED TO PROVIDE MOBILITY
OUTSIDE OF THE CAR BUT IT SHOULD NOT BE USED IN PLACE OF AN
APPROPRIATE COT.
THE BABY CAPSULE MUST ONLY BE USED WITH STROLLERS WITH COMPATIBLE
ATTACHMENTS. WE RECOMMEND SAFE-N-SOUND AND STEELCRAFT
STROLLERS.
IF IN DOUBT ABOUT THE METHOD OF INSTALLATION, CONTACT BRITAX
CHILDCARE CUSTOMER SERVICE ON 1300 303 330 AU/ 0508 688 822 NZ.
Always ensure the baby is secured in the Capsule with the harness at all times.
Do not carry an unrestrained baby in the Baby Capsule.
56
Instructions for Installation & Use