Installation Of Car Anchor Fitting - Britax UNITY Instructions For Installation And Use Manual

INSTALLATION OF CAR ANCHOR FITTING

Consult the vehicle owner's handbook for location of anchorage fittings or anchorage
points and the possible use of spacers. Some vehicles may have an anchor fitting
fitted by the vehicle manufacturer. If anchorage points cannot be found refer to car
manufacturer or local child restraint fitting station or traffic authority for optimum
position of anchorage point and the use of spacers.
UPPER ANCHORAGE STRAP
IMPORTANT:
THE ATTACHMENT CLIP COVER MUST ALWAYS BE USED AS IT PREVENTS
THE RISK OF INCORRECT FITMENT OF THE ATTACHMENT CLIP TO THE
ANCHOR FITTING. ALWAYS ENSURE THAT THE ATTACHMENT CLIP IS
CORRECTLY ENGAGED TO THE ANCHOR FITTING AND NOT HOOKED OR
FITTED TO ANY OTHER OBJECT BEFORE EACH USE OF THE RESTRAINT. THIS
IS ESPECIALLY IMPORTANT IN VEHICLES SUCH AS STATION WAGONS, VANS,
HATCH BACKS OR VEHICLES WITHOUT A FIXED PARCEL SHELF, SINCE THE
ANCHOR POINT IS USUALLY NOT VISIBLE.
IMPORTANT INSTALLATION NOTE:
In some vehicles the anchor fitting in the rear vertical panel can only be installed in
one way. Please refer to vehicle owner's handbook or a child restraint fitting station
for correct method.
53