Britax UNITY Instructions For Installation And Use Manual page 32

HOW TO USE
REMOVING BABY & INFANT CARRIER FROM BASE
A. Loosen the upper anchorage strap. Ensure that the adjuster does not fall on the
baby.
B. Remove the upper anchorage strap from the locating slots in the Infant Carrier.
C. Store the anchorage strap between the rebound bar and the car seat back so
that it will not fall behind the seat or get trapped in
the door. This will keep the upper anchorage strap
visible and ready for use when the Infant Carrier is
put back in the car.
D. Rotate the Carry Handle to the "carry position"
location (page 13).
E. Grasp the handle with one hand lifting the Infant
Carrier release catch with the other hand. With the
catch lifted raise the Infant Carrier clear of the base.
Always ensure the handle is locked in position
before lifting.
F. When the Infant Carrier is clear of the base, carefully
remove it from the car.
Ensure the Adjustment Strap hook is connected to the
cover, See page 29.
32
Lift
1
Pull Catch