Travel System - Integral Latch - Britax UNITY Instructions For Installation And Use Manual

TRAVEL SYSTEM - INTEGRAL LATCH

INSTALLATION INSTRUCTIONS PREPARING THE
INFANT CARRIER - LATCH METHOD
A. Remove Infant Carrier with the Baby from the Base by loosening the upper
anchorage strap and disengaging the upper restraint strap from the guides on the
back of the Infant Carrier.
B. Rotate handle into "carry position"
hand.
C. With the release catch depressed lift the Infant Carrier.
D. When Infant Carrier clears the base hooks, raise Infant Carrier further and remove
from the car.
PREPARING THE STROLLER
A. Ensure the Stroller has been assembled correctly before fitting the Infant Carrier.
B. Open the Stroller, apply the brakes and lower the backrest to the fully reclined
position.
C. Remove the arm bar cover and store in
the basket pocket.
* Refer to page 13 for handle position
then lift the release catch with the other
1
Arm Bar cover removed
45