Britax UNITY Instructions For Installation And Use Manual page 47

TRAVEL SYSTEM - INTEGRAL LATCH
D. Then lower the foot end of the Infant Carrier until it rests on the seating surface of
the stroller.
E. Fold the Infant Carrier handle down if
required, then check the Infant Carrier is
securely fixed to the stroller before use.
F. Refer to the Stroller instruction book for
other instructions.
REMOVING THE INFANT CARRIER FROM THE
STROLLER
A. Fold the Infant Carrier handle up to the "carry position"
hand.
B. Raise the Infant Carrier release catch located on the rear of the Infant Carrier.
C. Lift the Infant Carrier clear of the stroller.
ENSURE THE BABY IS SECURED IN THE INFANT CARRIER WITH THE HARNESS
AT ALL TIMES. THE INFANT CARRIER IS FITTED WITH A CANOPY WHICH CAN BE
USED WHEN THE CARRIER IS CONNECTED TO THE STROLLER. THE CANOPY CAN
ALSO BE USED IN THE CAR.
* Refer to page 13 for handle position
Stroller seating surface
1
and grip firmly in one
47