Britax UNITY Instructions For Installation And Use Manual page 37

TO REPLACE THE COVER
A. Place the cover over the infant carrier
ensuring all slots in cover line up with slots in
infant carrier.
B. Ensure that there are no twists in all straps
underneath the Infant Carrier.
C. Feed the shoulder harness straps through lap
strap slots in cover.
D. Feed the shoulder harness straps through
the shoulder strap slots in cover and then in
through the Infant Carrier. Refer to page 17
for correct shoulder harness position for your
baby. Attach the shoulder harness straps to
the strap connector.
E. Feed the crotch buckle as well as the harness
adjuster strap through the slots in the cover.
F. Refit plastic hooks on cover to Infant Carrier as
shown right.
G. Engage shoulder harness tongues and crotch
buckle. Pull to check harness is attached.
H. Ensure the straps are not twisted.
CARE & MAINTENANCE
Pull elastic cover over
Infant Carrier
Metal Strap Connector
Plastic Hooks
37