Britax UNITY Instructions For Installation And Use Manual page 27

B. Move the two harness tongues
to the outer extents of the infant
carrier, into the Buckle Tongue
Holder (if fitted).
Move the harness buckle
towards the Harness Adjuster.
C. Place baby into Infant Carrier lying on its back so that
the buckle is between the baby's legs. Ensure that baby's
arms and legs are free. Make sure baby is dressed to
allow the Harness Buckle to be pulled up between baby's
legs e.g. a jump suit.
before placing in the Infant Carrier, fit the blanket after the
harness is fitted.
NOTE:
1. Discontinue using the Padded Insert if the Pad causes
over heating, discomfort or you need more room for
baby to grow.
2. Correct fitment of the harness is very important as it
restrains the baby in the Infant Carrier. The harness
must fit firmly around upper torso of the baby and be
positioned so as to leave the baby's arms and legs free.
3. This Infant Carrier needs to be used until the baby
reaches the shoulder height marker. It is acceptable for
the legs to be bent to fit.
Buckle Tongue Holder (if fitted)
Never wrap the baby in a blanket
HOW TO USE
27