Virtual Ac - TRENDnet TEW734APO User Manual

TRENDnet User's Guide
 Firmware version: Current firmware version of the access point
 MAC Address: Displays the MAC address of the access point
 System Uptime: Displays the duration of the access point being active
 Registered Status: Displays the registration status of the access point with an
access controller
 AC MAC Address: Displays the MAC address of the access controller assigned to
the access point.
© Copyright 2015 TRENDnet. All Rights Reserved.

Virtual AC

In this mode the access point becomes the virtual access controller that can control thin
access points on the network.
Configuration
1. Log into the management page (see
2. Your access point will prompt you for a user name and password.
3. Enter the default user name and password and then click Login.
Default User Name: admin
Default Password: admin
4. Click the System button on the left side and then System Settings.
5. Select Virtual AC in the Device Mode drop down menu and Select your
Country/Region.
Note: FCC domain products will only support United States Country/Region.
TEW-734APO
"Access the management page" on page 9).
37