Creating A Wds Station; Using A Wds Station; View System Status; System Information - TRENDnet TEW-821DAP User Manual

TRENDnet User's Guide

Creating a WDS Station

System > Operation Mode
1
Log into your access point management page (refer to
on page 10).
2
Click System > Operation Mode.
3 On Operation Mode section, select WDS station.
4
Click Apply to save changes or Cancel to discard the changes.

Using a WDS Station

Wireless 2.4GHz or Wireless 5GHz >
1
Log into your access point management page (refer to
on page 10).
2
In Wireless 2.4GHz or Wireless 5GHz > Wireless Network > SSID section, do one of the
following:
• Specify the static SSID manually and click Apply or
• Click Wireless 2.4GHz or Wireless 5GHz > Wireless Network > Site Survey.
3
The available networks are listed. Select a network to connect to.
If you are unable to find your wireless network in the list, click Refresh to rescan
ÍNote:
for the available networks.
4
Click on the SSID field to connect to the selected wireless network.
5
Click Apply to save the wireless network.
© Copyright 2015 TRENDnet. All Rights Reserved.
"Log in to Management Page"
Wireless Network
"Log in to Management Page"

View System Status

System Information

Status > Main
View the device information, and LAN and Wireless LAN configuration.
1
Log into your access point management page (refer to
page 10).
2
Click Status > Main.
• In the System Info section:
ƒ Device Name: Display name of this device that is recognized by other network
devices such as SNMP.
ƒ Firmware Version: Display currently run firmware version.
ƒ System Time: Display the current time is important for schedule control and
log accuracy.
ƒ System Up Time: Display how long the system has been running without
reboot.
TEW-821DAP
"Log in to Management Page" on
28