Overview; Device Status - TRENDnet TEW-840APBO User Manual

14 dbi wifi ac867 outdoor poe preconfigured point-to-point bridge kit
Hide thumbs Also See for TEW-840APBO:
Table of Contents

Advertisement

TRENDnet User's Guide

Overview

Device Status

Overview > Device Status
This page will display the AP system summary information such as the device name,
serial number, system time, firmware version, MAC, IPv4/IPv6 address settings, WiFi
information, etc.
1. Log into your access point management page (see
management
page" on page 29).
2. Click on Device Status from the left side menu. To refresh the page, click Refresh at
the bottom of the page.
Device Information
Device Name – Displays the identifying device name of your access point. This
information can be modified under the Network > Wireless section.
Serial Number – Displays the serial number assigned during manufacturing
process.
MAC Address– Displays the MAC address for both the access point's LAN and
WLAN radio.
Country – Displays the country of the access point
Current Local Time – Displays the current time assigned to the access point.
This information can be modified under the Management > Time Zone section.
Uptime – Displays the time the access point has been powered on.
Firmware Version – Displays the current firmware of the access point
Management VLAN ID – Displays the currently VLAN ID status.
© Copyright 2019 TRENDnet. All Rights Reserved.
"Access your access point
Memory Information
This section displays the access point's memory or RAM usage status.
LAN Information IPv4
IP Address – Displays the IPv4 address assigned to the access point. This can be
modified under the Network > Basic section.
Subnet Mask – Displays the current IPv4 subnet mask assigned to your access
point.
Gateway – Displays the current gateway address assigned to your access point.
Primary DNS – Displays the primary Domain Name Server (DNS) assigned to
your access point.
Secondary DNS – Displays the secondary Domain Name Server (DNS) assigned
to your access point.
DHCP Client – Displays the status of the DHCP client.
Spanning Tree Protocol (STP) – Displays the status of the STP.
TEW-840APBO / TEW-840APBO2K
29

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tew-840apbo2k

Table of Contents