System Setting - TRENDnet TEW734APO User Manual

TRENDnet User's Guide

System Setting

This page displays thin access points connected in the network.
1. Log into the management page (see
2. Click on Management and System Settings.
Device Settings
 Device Mode: Select the mode you would want the access point to operate on.
 Connect Mode: Select the mode the access controller will be connected
 Device Name: Enter the name of the device
 Spanning Tree: Select to enable Spanning Tree feature
 STP Forward Delay: Enter the delay time duration
Enable VLAN
 Enable 802.1Q VLAN: Select to enable VLAN feature
 VLAN ID: Enter the assigned VLAN ID of the access controller
© Copyright 2015 TRENDnet. All Rights Reserved.
"Access the management page" on page 9).
IP Address
 DHCP Client: Select to have access controller to receive IP address from your
DHCP server
 Static: Select this option to manually configure the access point's IP address.
o IP Address: Enter the IP address to assign
o Subnet Mask: Enter the subnet mask of the access point
o Gateway IP Address: Enter the gateway IP address
o DNS1-2: Enter the DNS IP address to assign on the access point.
DHCP Server
 DHCP Client: Select to enable DHCP server
o DHCP IP Address Range: Enter the DHCP IP range to assign
o Subnet Mask: Enter the Subnet mask to assign DHCP clients
o Lease Time: Enter the lease time duration for DHCP clients.
TEW-734APO
38