TRENDnet User's Guide
Access Control
This section allows you to allow or block certain wireless clients to connect to the
wireless network.
Click Enable Access Control to turn on the feature, select White list or Black list then
enter the MAC address then click on Add.
Note: If you white list the device, only the listed devices can access the powerline access
point.
© Copyright 2016 TRENDnet. All Rights Reserved.
Maintenance
Device Management
In the Old Password field, enter the old password (by default, the password is admin)
then enter the new password. Then enter the password again in the Confirm Password
field to verify.
To save changes, click Apply.
Note: If you change the access point login password, you will need to access the access
point management page using the User Name "admin" and the new password.
TPL‐410AP / TPL‐410APK
15