Canon MultiPASS C5000 Service Manual page 45

Powering Up
A
Follow these guidelines when connecting your MultiPASS C5000 to a
power source:
The MultiPASS CSOOO is intended for use in the U.S. and Canada
only and requires 120 V AC. Do not use it outside the U.S. or
Canada.
prong grounded outlet.
Use only the power cord that came with the unit. Using a longer
cord or extension cord can cause the MultiPASS C.5000 to
malfunction.
Unplug the unit only by pulling on the plug itself. Never pull on the
cord.
Do not plug the MultiPASS C5000 into an outlet shared with an
appliance such as an air conditioner, computer, elfctric typewriter,
or copier. These devices generate electrical noise, which can
interfere with the MultIPASS C5OOO's operation.
Make sure nothing is laying on the power cord, and that the cord
cannot be walked on or tripped over.
Do not overload the electrical outlet. Make sure the total amperage
used by all the machines plugged into the outlet does not exceed the
ampere rating of the outlet's circuit breaker.
Make sure that the operation paw1 of the MultiPASS C5000 is
properly closed, and that there are no documents in this arm
Chapter 7: General Description
1 - 3 1