Canon MultiPASS C5000 Service Manual page 106

1.6 General Tools
Tool
Phillips screwdriver
Flat bladed screwdriver
Precision Phillips screwdriver
Precision flat bladed screwdriver
Isopropyl alcohol (IPA)
Pliers, needle nose
1.7 Special Tools
Tool'
Grease (FLOIL G311S)
Grease (EM-50L)
Grease (IF-20)
Gap gauge (1.2mm)
BJ cartridge (BC-20/BC-21)
Cover opener
Cover opener
The Cover opener (round-tip screwdriver) has been set as a special tool, but
any precision screwdriver with a tip dkmeter of 1.5 mm or less would do
instead. If using a substitute, be careful not to scratch any surfaces. See
NOTE
Chapter 3: Maintenance & Service
Use
Removing/inserting screws
Removing/inserting screws
Removing/inserting screws
Removing plastic tabs
Removing coil spring
Cleaning the cleaning location
Driving retaining ring
Apply to specified parts
Apply to specified parts
Apply to specified parts
For head gap adjustment
For head gap adjustment,
For opening the upper cover
3-3
Part No.
TKC-0953