Canon MultiPASS C5000 Service Manual page 156

Part 7: Facsimile
b) Operation panel tests
The operation panel test is selected by pressing the 7 button from the faculty test menu.
In this test, check that the display, LED lamps, and buttons on the control panel are
operating correctly.
b-l) Display test
Pressing the
characters by 1 line on the display. The next time the
all the LCD dots on the display are displayed. Check for any LCD dots in the display
that are not displayed.
b-2) LED lamp test
The LED lamp test is selected by pressing the
test.
When the
Check for any LED that does not light during the test.
b-3) Operation button test
The Operation button test is selected by pressing the
LED lamp test.
In this test, you press the button corresponding to the displayed character to put it out.
The table giving the correspondence between the characters and the buttons is below.
R
D
When all the characters displayed have gone out, the system next starts the one-touch
speed dialing button test. The letters a-f are displayed on the display, corresponding to
one-touch speed dialing buttons 01-06. Each letter displayed on the display goes out
when its corresponding one-touch speed dialing button is pressed.
In this test, check for operation buttons whose corresponding character or letter does not
go out when the button is prcsscd.
button from the control panel menu, "H" is displayed 16
S T A R T / C O P Y
button is pressed, all the lamps on the control panel light.
S T A R T / C O P Y
Numeric buttons
Coded dial button
START/COPY
START/COPY
S T A R T / C O P Y
Color-copy-resolution button
B & W FAX/COPY-resolution button
&
Function button
F
Cartridge button
C
M Resume button
3-54
button is pressed,
button after the display
button after the