This machine has been designed for user installation. Therefore, this manual
contains only an outline description of the procedures. For details of the
installation, see the USER'S GUIDE.
1.1 Setting up
Choosing a Location for Your MultiPASS
Do you have everything?
Check that nothing is missing when the unit is unpacked.
Removing shipping materials
Peel off all strips of tape from the unit. Don't forget to remove the protective sheet from the
separation roller, in the scanner section.
Assembling your MultiPASS
Install the accessories, Sending Document support, Document support for scanned
documents, Output tray extension, etc.
Connect the Telephone line, Extension phone or Answering machine, Parallel cable (for
Connect the power cord and check that power is supplied.
Installing the BJ cartridge
Unseal the BJ cartridge, and load it into the machine. The instructions for this operation
arc written on the printer cover.
Set paper in the auto sheet feeder, in
the size of paper that is to be used.
the TEL LINE TYPE
Choose the setting the matcht~d the type of line Iwing used.
Entering user information
Enter user information, such as
1.2 Checking Operations
Make a copy, and check that tbc operation IS normal.
SELECT PAPER SIZE under FAX PRINTER SETUP.
DATE & TIME, UNIT TELEPHONE #, UNIT NAME <'IV.
Chapter 4: Appendix