Canon MultiPASS C5000 Service Manual page 127

Part 1: Facslmlle
d) New error codes end recovery methods
There is no new error code in this model.
Note, however, the following supplementary information, as the machine requires
different actions than the existing models to correct:
Solution:
Unlike errors that trigger the "CHECK PRINTER" message, This error
is programmed so that it cannot be cleared using the STOP button.
Replace the waste ink absorber as follows in the error c~ccurs:
counter to 0.
to step cl), press the
the printer.
The error will be cleared, and the image stored in memory will
automatically be printed.
the power, remove the appropriate parts, and replace the waste ink
absorber.
3-24
button and the * button to reset
START/COPY