Part 1: Facsimile
Choosing a Location for Your MultiPASS
Before unpacking your MultiPASS C5000, follow these guidelines to
choose the best location for it.
Please review the information provided in "Safety Instructions", to
make sure you are installing your MultiPASS C5OOO for safe use.
Put the MultiPASS GO00 in a cool, dry, clean, well ventilated place:
Make sure the area is free from dust.
Make sure the location is not affected by extreme temperature
changes, and always stays between 50" and Y0.5"F (10" and
Make sure the area's relative humidity is always between 10%
Keep the MultiPASS C5000 away from direct sunlight.
If possible, put the MultiPASS C5000 near an existing telephone
outlet, to avoid the expense of installing a new one.
Place the MultIPASS GO00 near an electrical wall outlet that accepts
three-prong, grounded plug, md that provides 120.volt AC (60
contact an electrician to check the power for you.)
Place the MultiI'ASS GO00 war the PC you will be connecting it to.
Make sure you can reach it easily, as you will bc using it as a printer,
copier, scanner, and telephone.
Do not plug the MultiI'ASS CWOO into the same circuit as an
or copier. Such devices generate electrical noise that can interfere
with your MultiPASS C5000'5 'tbility to send or receive faxes.
Set the MultiPASS C5OOl) on a flat, stable, vibration-free surface that
is strong enough to support its Ivcight (about 12.3 lbs/5.6 kg).
Make sure the locntian you choose provides enough space around
flow freely into and out of the unit. The figure below shows the
minimum space required for the unit.